Choose Language: Japanese Korean Spanish Russian German French Portuguese Arabic Italian
我的账号 购物车
 
Product Categories
如何使用克莱萠Cloupor迷你30W盒子Mod  

The Cloupor Mini 30W Box Mod is a small but powerful box mod that is packed with a ton of notable features.
It has an output range of 7 to 30 watts or 3.6 to 7 volts, being that VV/VW mode can be switched
manually on the device.
This tiny 30 watt box mod has adjustable 510 connection and takes resistance as low as 0.45Ω. It
small enough to be completely covered in the palm of your hand. Unlike other small mods, the Cloupor Mini allows you to change out your 18650 batteries. This device also comes equipped with a passthrough feature for on board battery charging.

Cloupor Mini 30W Box Mod schematic diagram

Cloupor Mini 30W Box MOD Features:
 
1. Size: 77.5mm*36mm*22mm
2. Variable voltage:3.6V to 7.0V
3. Variable wattage:7W to 30W
4. Max output current: 10 Amps
5. OLED display screen, shows the currently battery power, wattage, voltage, resistance
6. Removable 18650 battery
7. VV/VW Mode can be switched manually
8. Vaping time counting ( 15S limited protection )
9 ompletely compatible with eGo|510 thread (MEGA) atomizers /clearomizers, can build on 0.45-3.0
ohm atomizer
10. Adjustable 510 Pin
11. Ohms reading calculats to 0.01ohm
12. Reverse battery protection , no worry about installing battery improperly
13. Left & Right Mode
14. Magnet back cover,no need to use screwdriver,more convenient
15. Instead of screen lock, It can be turned off
16. Over charge protection

 

How to Use Cloupor Mini 30W Box Mod
 
1. Battery installation;
 
Push down the magnetic back door to open the back door, insert a 18650 battery. Please make
sure the battery be installed in the proper position.
 
  how to insert a 18650 battery to Cloupor mini boxhow to put the battery to Cloupor mini
 
ATTENTION: Althrough the battery have reverse protection, please make sure the battery be installed in the proper position. +positve side of battery towards the top of the divice. - Negative side towards the bottom.

 

2. Turn on/off;
 
Press the fire button 5 times in 3 seconds to turn the device on or off. While turned off, the device will not fire and the output power will not adjust accidentally.


 turn on/off the Cloupor miniturn on/off cloupor mini 30w box mod
  
 
3. Right mode & Left mode
 
While turned on holding the fire button & up button simultaneously for 5 seconds flips the display. This setting
is stored to internal flash memory, and remains if the battery is removed.
 
  what right/left mode of the Cloupor minithe right/left mode of cloupor mini 30w box mod
 
4. VV/VW mode
 
While turned on, holding the fire button and down button simultaneously for 5 seconds, the mode will be changed
.
 
  VV/VW modeVV/VW cloupor mini 30w box mod
 
5. Power locked mode
 
While turned on, holding the up button and the down button simultaneously  for 5 seconds, the

power will be locked. In this mode, you will not be able to change the power settings. This mode

prevents accidental power level changing, due to the buttons being mis-pressed while in the

pocket. Also, users can do the same to exit this mode.
 
  Power locked mode of Cloupor minihow to lock power of cloupor mini 30w box mod
 
6. Passthrough function
 
The Cloupor Mini can be charged while vaping.

Passthrough function of Cloupor mini

7.Error Messages:

Cloupor mini will indicate a variety of error messages, as follows:check atomizer/shorted/low power/too hot/too low power setting/device resets/auto power sleep mode

NOTE:
1. This is an advanced mod for advanced users only. Please be aware that this mod requires knowledge of battery safety and technical know-how to work properly.
2. Please use the screw driver to adjust the connect pin, if the mod indicates "Check Atomizer", while the atomizer is fine

Talk with me